filename: tfs 611.doc version 1.3 14.08.2008 vectron international filter specification tfs 611 1/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout measurement condition ambient temperature: 25 c input pow er level: 0 dbm terminating impedance: * input: 250 ? || -4,5 pf output: 210 ? || -4,6 pf ch aracteristics remark: the reference lev e l for the relativ e attenuation a rel of the tfs 611 is the minimu m of the pass band attenuation a min . the minimum of the pass band attenuation a min is defined as the insertion loss a e . the centre frequency f c is the arithmetic mean v a lue of the upper and low e r frequencies at the 3 db filter attenuation lev e l relativ e to the insertion loss a e . the nominal frequency f n is fix ed at 611,0 mhz w i thout any tole rance. the giv en v a lues for both the relativ e attenuation a rel and the group delay ripple hav e to be achiev ed at the frequencies giv en below ev en if the centre frequency f c is shifted due to the temperature coefficient of frequency tc f in the operating temperature range and due to a production tolerance for the centre frequency f c . d a t a ty p. v a lue tolerance / limit insertion loss at ambient temperature a e 5 , 6 d b m a x . 6 d b (reference level) nominal frequency f n - 6 1 1 m h z centre frequency at ambient temperature f c 611,0 mhz 0,5 mhz relativ e attenuation a rel f c ? f c 3 mhz 0,5 db max. 1 db f c 3 m h z ? f c 3,5 mhz 1,5 db max. 3 db f c 4 m h z ? f c 9 mhz 5 db min. 3 db f c 9 m h z ? f c 100 mhz 47 db min. 40 db f c 1 0 0 m h z ? f c 500 mhz 60 db min. 50 db operating temperature range otr - - 40 c ... + 85 c storage temperature range - - 40 c ... + 85 c temperature coefficient of frequency t c f ** -18 ppm/k - *) the terminating impedances depend on paras itics and q-v a lues of matching element s and the board used, and are to be understo od as reference v a lues only . should there be additional ques tions do not hesitate to ask for an applic ation note or contac t our design team. **) ? f c (hz) =t cf (ppm/k)x (t 0 -t a )x f ca t (mhz) ge ne ra te d: ch ecked / a p p r o v ed : notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 611.doc version 1.3 14.08.2008 vectron international filter specification tfs 611 2/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout f ilter ch aracteristic 431 467 503 53 9 575 611 647 683 719 755 79 1 -7 0 -6 3 -5 6 -4 9 -4 2 -3 5 -2 8 -2 1 -1 4 -7 0 f r eq u e n cy i n m h z m a g n it u d e in d b in s e r t i o n lo s s : - 5 .9 8 d b 607 607. 8 608. 6 609. 4 610. 2 611 611 . 8 61 2. 6 6 13. 4 614. 2 615 -1 0 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 f r e que nc y i n m h z m a g n it u d e in d b 607 607. 8 608. 6 609. 4 610. 2 611 611 . 8 61 2. 6 6 13. 4 614. 2 615 -0 . 5 0. 25 1 1. 75 2. 5 3. 25 4 4. 75 5. 5 6. 25 7 f r e que nc y i n m h z d e la y in s cons truc tion a nd pin c onne c t ion (all dimensions in mm) 7 5 13 1, 8 m a x . 2, 5 4 0, 1 1, 1 1, 1 1 2 0 0, 6 4 5 -0 , 1 0 + 0, 15 13 5 7 d a t e c ode date code: y ear + w eek w 2008 x 2009 a 2010 ... 1 input 2 input rf return 3 ground 4 ground 5 output 6 output rf return 7 ground 8 ground s 611 w33 50 ? t est circu i t c2 l 1 c1 sa w l2 c3 c4 2 3, 4, 7, 8 6 5 1 notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 611.doc version 1.3 14.08.2008 vectron international filter specification tfs 611 3/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout stability characteristics, reliability after the follow i ng tests the filter shall meet the w hole specification: 1. shock: 500g, 1 ms, half sine w a ve, 3 shocks each plane; din iec 68 t2 - 27 2. vibration: 10 hz to 500 hz, 0,35 mm or 5 g respecti vely , 1 octave per min, 10 cy cles per plan, 3 plans; din iec 68 t2 - 6 3. change of temperature: -55 c to 125c / 30 min. each / 10 cy cles din iec 68 part 2 ? 14 test n 4. resistance to solder heat (reflow ): reflow possible: three times max.; for temperature conditions refer to the attac hed "air reflow temperature conditions" on page 4; 5. esd mil-std-883e using coupling netw o rk of iso 10605 and en 6100-4-2 hbm:250v; cdm:v; this filter is rohs compliant (2002/95/eg, 2005/618/eg) packin g tape & reel: iec 286 ? 3, w i th exception of value for n and minimum bending radius; tape ty pe ii, embossed carrier tape w i th top cover tape on the upper side; max. pieces of filters per reel: 3000 reel of empty components at start: min. 300 mm reel of empty components at start including leader: min. 500 mm trailer: min. 300 mm g do w ct f e g d1 p2 p1 po bo ao p u l l o ff di r e c t io n pi n m a r k e r ty p da t e c o d e ko t tape (al l di mensi ons i n mm) w : 12,00 po : 4,00 do : 1,50 e : 1,75 f : 5,50 g(min) : 0,75 p2 : 2,00 p1 : 8,00 d1(min) : 1,50 a o : 5,30 bo : 5,30 ct : 9,5 a c n w 1 w 2 r eel (all d i men s io n s in mm) a : 330 w 1 : 12,4 w 2 (max ) : 18,4 n(min) : 50 c : 13,0 the minimum bending radius is 45 mm. notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 611.doc version 1.3 14.08.2008 vectron international filter specification tfs 611 4/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout a i r re flow te mpe r a t ure c onditions conditions exposure average ramp-up rate (30c to 217c) less than 3c/second > 100c betw een 300 and 600 seconds > 150c betw een 240 and 500 seconds > 217c betw een 30 and 150 seconds peak temperature max. 260c time w i thin 5c of actual peak temperature betw een 10 and 30 seconds cool-dow n rate (peak to 50c) less than 6c/second time from 30c to peak temperature no greater than 300 seconds chip-mount air reflow profile temperature / c max. 260c 217c time / s max. 300 s 10 ... 30 s 30 ... 150 s notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
filename: tfs 611.doc version 1.3 14.08.2008 vectron international filter specification tfs 611 5/5 vectron international gmbh & co. kg potsdamer stra?e 18 d 14 513 teltow / germany tel: (+49) 3328 4784-0 / fax: (+49) 3328 4784-30 e-mail: tft@v e ctro n.co m vectron international gmbh & co. kg reserves the right to ma ke changes to the product(s) and/or information contained herein w i thout history version reason of changes name date 1.0 generation of specification pfeiffer 24.03.2003 1.1 revised according to customer requirements steiner 23.07.2003 1.2 terminating impedance, ty pical values and matching configuration added pfeiffer 13.01.2004 1.3 change o t r and stability characteristics strehl 14.08.2008 add filter characterisics notice. no liability is assumed as a result of their use or application. no rights under any patent accompany the sale of any such product(s) or information.
|
